All posts by hammelmannindia

HAMMELMANN Airport Runway Cleaning Solutions

Airport Runway cleaning
airport-runway-cleaning1Sound proofed high pressure water vehicle specifically for the purpose of flight safety, which is employed to remove.
  • Tyre rub-off on (take-off and landing) runways
  • oil and fuel grime on aprons
  • runway markings

airport-runway-cleaning2

The various types of deployment vehicles can be equipped with a continuous adjustable hydraulic low-speed drive, marking it possible to proceed steadily even at extremely low speeds – eg, during runway marking work.
The continual increase in air traffic necessarily leads to increased tyre rub-off on runways. The danger of skidding resulting from slippery runways is familiar to airport safety experts, for which reason frictiontests are conducted regularly.
If we are to ensure the highest possible degree of safety during landing, it must become standard practice at today ́s airports toremove tyre rub-off before it
reaches the critical limit.

 

 

Hammelmann Application for Aerospace Industry

Hammelmann Application for Aerospace Industry

Image of Aerospace Booster Rocket
Surface preparation on a booster rocket
Reconditioning turbine blades

 

Application examples
  • Heat shield tile removal
  • Paint and insulation removal
  • Intensive cleaning of metal surfaces for post flight inspection
  • Reconditioning turbine blades

 

 

 

 

 

 

Surface Preparation Solutions from Hammelmann

Surface preparation is the essential first stage treatment of a material substrate before the application of any coating, and is generally accepted as being the most important factor affecting the total success of a corrosion protection system.

High-pressure surface preparation is not only economical, but with so many environmental advantages it is swiftly becoming the preferred process for coating removal by many major industries.  High Pressure technology delivers the power to clean the most difficult surfaces down to white metal quickly and cost effectively using a minimum amount of water.

Lets find out few surface preparation tools.

Image of Spider Jet

Spiderjet

Spider jet is a semi-automatic device used in shipping industries for surface preparation using ultra high pressure up to 3000 bar.

    • This unit can be used for stripping vertical inclined and horizontal surfaces.
    • The Spider jet attaches to the work surface by vacuum force at is driven by a pneumatic motors.
    • The vacuum also retrieves all waste water and removed solids.
    Image of RD FLex 3000

    RD Flex 3000

    This is a high pressure cleaning accessory used in High Pressure Guns for renovation like surface layer removal, Paint removal, concrete removal, expansion joint removal, Paint booth grid & skid clean up, Hull deck and superstructure surface preparation.

    • Pressure up to maximum 3000 bar.
    • Flow rate up to 30 liters per minute.
    • Rotation speed from 1000 to 4000 RPM
    Image of FRV 3000

    FRV-3000

    Cleaning equipment used for on deck cleaning, paint booth cleaning and or various other surface preparation using high pressure spray bars.

    A vacuum system is attached to this equipment in order to collect the waste water and debris from the surface.

    The maximum operating pressure is up to 3000 bar.

    Image of Hand Aquablast

    Hand aquablast

    It is a cleaning device used for surface preparation using a vacuum system operated manually.

    Cleaning, striping vertical surfaces.

    Ship repair- removal of marine growths, stripping hull coatings

    Construction Industry: removal of paints and for other concrete surfaces.

 

 

Process Pumps

What is a process pump?

 Process Pumps are used to move fluid in an industrial process.

Process Pumps can be any variety of pump types depending on the application.

They can be either heavy-duty centrifugal pumps used to pump corrosive or abrasive fluids. Or, they can also be positive displacement pumps.

we offer wide range of process pumps.. please visit our website to know more….